Robert Axle Project Wahoo KICKR Trainer Thru Axle Kit – 12x142mm, 2014 and 2016
-
$58.00
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
Description
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
Related
Reviews (0)
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
- Cartridge Bearing 119
- Internally Geared Hub Part 81
- Load Bar/Tower Set 9
- Roof Rack Accessory 16
- Repair Stands 31
- Disc Rotor Adaptor 8
- Pedal Washer 8
- Thread Repair Kits 5
- Kid 5
- Remote Upgrade Kits 8
- Peg Sleeve 14
- Knickers 10
- Casual Short 5
- Mountain Frame 53
- Cargo Carrier 5
- Disc Brake Fluid 5
- Shifter Battery Charger 8
- Hydraulic Brake Lever Part 225
- Load Bar 5
- Coffee 5
- Brake Shoe and Pad 94
- Headlights 61
- Luggage/Duffel Bag 8
- Trailer Frame Parts 16
- Cable Fixing Assembly 10
- Rigid Mountain Fork 21
- Pedal Wrench 5
- Disc Brake & Lever 4
- Spindle 17
- BMX Crankset 63
- Remote Shifter 11
- Disc Brake Hose Kit 97
- One-Piece Crankset 5
- Spoke Tensiometer 5
- Helmet Parts and Accessories 5
- Light Part 60
- Top Cap 13
- Cyclocross Bike 18
- Shifter 5
- Rack Accessories 9
- U-Brake Part 7
- Battery Charger Cable 6
- Bracket/Accessory 26
- Travel / Shipping Cases 8
- Bag Part 26
- Chainring 6
- Polish 12
- Lumbar/Fanny Pack 15
- Other Trailer Parts 20
- Phone Charger 5
- Track Frames 5
- Pedal Small Part 111
- Recovery 5
- Compression Bottom 5
- Swim Wear 5
- Folding Lock 30
- Brake Pad and Shoe Part 14
- Belt Drive Ring 16
- Branded Sign/Banner 11
- Rear Hub 222
- Trunk Rack Accessory 6
- Air Springs & Parts 152
- T-Shirt 5
- Roof Rack Bike Carrier 12
- Hitch Rack Part 5
- Road Shifter Part 101
- Rear Wiring Kit 5
- Child Carrier Trailer 16
- Aero Bar Extensions 17
- Computer Mount Kit/Adapter 118
- Road Frames 21
- BMX Peg 19
- Messenger Bag 5
- Brake Housing 35
- Mustache Bar 5
- Rear Shock Service Kits 55
- Tire Liners 39
- Brake Lever 5
- Crown Race 29
- Disc Brake Calipers 106
- Dropper Seatpost Remote 56
- Linear Pull Brake Noodle 16
- Cadence/Speed Sensor 17
- Training Wheel 10
- Cleat Cover 7
- Bar Tape 169
- Reflective Stick-on 5
- Bars 49
- Direct Mount Chainrings 340
- Roof Rack Wheel Fork 9
- Roller Brake 9
- Disc Golf 5
- Chains 196
- Fixtures & Accessories 3
- Bag & Tool Kit 2
- Hitch Rack Accessory 32
- Road Bike 26
- Track Bike 10
- Brake 5
- Bicycle Mounted Rack Part 53
- Cable Cutter 5
- Other Brake Lever Part 26
- Compression Plug 15
- Headset Tool 5
- Dropout 43
- Wheel/Frame Lock 20
- Drop Bar Stoker Lever 5
- Magnet 7
- Container 5
- Van/Truck Bed Rack 12
- Bottom 5
- Water Bottle Cage Hardware 37
- Cyclocross/Hybrid Fork 40
- Gloves 480
- Fairing 5
- Electronic Shifter Extra Part 27
- Disc Golf Display 5
- Integrated Handlebar/Aero Bar 7
- Tubeless Valves 141
- Spoke Nipple 35
- Road Caliper Brakes 61
- Spoke Kit 20
- Derailleur Hanger Hardware 8
- Derailleur 5
- Body Cleanser/Hygiene 6
- Tubeless Sealant 55
- Water Bottle Part and Accessory 10
- Grease 43
- Axle Nut and Bolt 20
- Jackets 111
- Assembly Compound 21
- Linear Pull Brake Small Part 7
- Heart Rate Straps and Accessories 11
- Power Meter 5
- Miscellaneous Rear Derailleur Part 88
- Ebike Crankset 95
- Saddle Care and Part 7
- Cyclocross Frame 24
- Clip-On Aero Bar 20
- Ski Carrier 10
- BMX Caliper Brake Sets 6
- Pulley Assembly 70
- Internally Geared Hub 22
- Brake Lever Hood 32
- Crank Part 50
- Front Derailleur 91
- All-Road Frame 40
- Washer 10
- Drum Brake Part 5
- Anti-Fog 5
- Miscellaneous Spoke Tool 5
- Headlight & Taillight Set 32
- Detanglers 19
- Bolt 28
- Hub Set 5
- Seatpost Part 28
- Cable Stop and Guides 11
- EPS Charger 5
- Bulk Wax 5
- Axle Set 30
- Front QR Skewer 14
- Y-Wrench 5
- Headset Stack Spacer 66
- Front Hub 115
- Watersport Carrier 5
- TT/Aero Brake/Shift Lever 5
- Cage Assembly 57
- Dropper Seatpost 222
- Taillight 67
- Pillow 5
- Headset Upper 48
- Sunglasses 23
- Nut 8
- Belt Drive Belt 19
- First Aid Kit 5
- Tubeless System Enhancements 44
- Entrees 5
- Steerer Extender 5
- Quick Release Skewer Pair 12
- Rear Shock Mount Kit 185
- Leg Bands 8
- Drop Bar Inline Levers 9
- Interface Unit 5
- Kit-In-A-Box Road Group 8
- Stem Small Part 29
- Lower Leg Assembly 27
- Tubular Adhesive 9
- Saddle 15
- Left Crank Arm 67
- Bike Protector 7
- Thru Axle Trailer Hitch Adaptor 44
- Front Derailleur Adaptor 19
- Trailers 16
- Wheel Bag 6
- Hammock 5
- Dropper Seatpost Part 234
- Retail Store Fixture and Accessory 6
- Beverage Essentials 10
- Wound and Skin Care 5
- Decarolis 27
- Rear Mount Rack 45
- Anti Chafe 27
- Stem Column Adaptor 9
- Trainer Accessories 26
- Service Kit 101
- Running Pant 5
- U-Brakes 14
- Power Unit 5
- Cookware 5
- Headset Top Cap 23
- Dry Bag/Stuff Sack 5
- Backpack 22
- Seatposts 123
- Stems 493
- Travel / Shipping Case Part 5
- Strollers 5
- Pulley Bolt 11
- BMX Bikes 5
- Child Carrier 18
- Tool Wrap 27
- TT/Aero Lever Pair 8
- Chair 5
- Chainstay/Frame Protection 122
- Bleed Kit 5
- Dresses and Skirts 5
- Foot Care 5
- Tubeless Conversion Kits 13
- Other Rack 22
- Front Custom Wheel 5
- Trainer Part 35
- Thru Axle 134
- Running Tight 5
- Linear Pull Brake Set 14
- Extra Parts 9
- Safety Light 7
- Woman 5
- Cassettes 284
- Van/Truck Bed Rack Part 6
- Ebike Lock 30
- Spoke 5
- Shifter Battery 8
- Trailer Stroller/Ski Kits 8
- Cable Anchor Assembly 15
- Bottle Cage Storage 13
- Gear Maintenance 5
- Rim Part 36
- Insect Bite Relief and Repellent 5
- Bottom Bracket 5
- Pocket Knives and Multi-tool 5
- Disc Rotor Parts and Lockrings 46
- Apron 5
- Insect Net 5
- Tubeless Tape 77
- BMX Hub Guard 29
- Wear Indicator 5
- Bell 75
- First Responder Assistance 5
- Rack Service Part 10
- Cantilever Brake Set 6
- Junction Box 15
- Bianchi 96
- Seatpost Clamp 121
- Load Bar Tower 5
- Small Part 67
- Mountain Bike 42
- Freehub Body 141
- Trailer Wheels and Axle Parts 43
- Trailer Covers/Fabric Parts 20
- Cable Adjustment Assembly 9
Related Products
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
-
In stock
The Hope Spiderless Direct Mount eBike chainring for Brose motors are specifically designed to withstand the additional rigors of the increased power transmitted by eBike motors.
- Directly mounts to Brose eBike motors and replaces the full spider assembly for a lighter and cleaner looking set- up
- CNC machined from a single piece of 7075-T6 aluminum billet, these chainrings provide the perfect blend of light weight and strength
- Narrow/Wide chainring is designed to retain the chain without the need of a chain device
- Designed to give a 52mm chainline to suit 148 Boost Frames
- Hard anodized for an ultra-durable finish and increased longevity
- Also Compatible with the Specialized Turbo Levo range of eBike motors
-
Only 2 left in stock
The Garmin Tacx Trainer Axles QR (Quick Release) are designed to make your bike compatible with Tacx trainers. These axles are essential for securely mounting bikes with different axle standards onto Tacx trainers, ensuring a stable and efficient indoor training experience.
-
In stock
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
-
In stock
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
-
Only 5 left in stock
-
Only 1 left in stock
The Hope Spiderless Direct Mount eBike chainring for Bosch Performance Line CX Gen 4 eBike motors are specifically designed to withstand the additional rigors of the increased power transmitted by eBike motors.
- Directly mounts to Bosch Performance Line CX eBike motors and replaces the full spider assembly for a lighter and cleaner looking set- up
- CNC machined from a single piece of 7075-T6 aluminum billet, these chainrings provide the perfect blend of light weight and strength
- Narrow/Wide chainring is designed to retain the chain without the need of a chain device
- Designed to give a 52mm chainline to suit 148 Boost Frames
- Hard anodized for an ultra-durable finish and increased longevity
-
Only 2 left in stock
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
-
In stock
The Hope Spiderless Direct Mount eBike chainring for Brose motors are specifically designed to withstand the additional rigors of the increased power transmitted by eBike motors.
- Directly mounts to Brose eBike motors and replaces the full spider assembly for a lighter and cleaner looking set- up
- CNC machined from a single piece of 7075-T6 aluminum billet, these chainrings provide the perfect blend of light weight and strength
- Narrow/Wide chainring is designed to retain the chain without the need of a chain device
- Designed to give a 52mm chainline to suit 148 Boost Frames
- Hard anodized for an ultra-durable finish and increased longevity
- Also Compatible with the Specialized Turbo Levo range of eBike motors
-
Only 4 left in stock
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
-
Only 4 left in stock
Reviews
There are no reviews yet.