Kuat Sherpa 2.0 Hitch Bike Rack – 2-Bike, 2″ Receiver, Pearl
-
$759.00
Sherpa 2.0 features folding tire cradles that hold tires up to 3″ wide and fold flat when not in use, a foot-actuated pivot lever that allows hands-free use of unfolding the rack and a lightweight 32 lbs construction for easy installation and removal. Best used with road, CX and Mountain Bikes, the Sherpa 2.0 is ready for your next adventure.
- Two-bike capacity, up to 40 lbs each
- Holds wheelbases up to 47" and tires as large as 3" width
- Spacing increased between bikes to 14"
- Foot-actuated pivot lever for easy rack folding/unfolding
- Integrated bike lock
- Tool-Free installation
Description
Sherpa 2.0 features folding tire cradles that hold tires up to 3″ wide and fold flat when not in use, a foot-actuated pivot lever that allows hands-free use of unfolding the rack and a lightweight 32 lbs construction for easy installation and removal. Best used with road, CX and Mountain Bikes, the Sherpa 2.0 is ready for your next adventure.
- Two-bike capacity, up to 40 lbs each
- Holds wheelbases up to 47" and tires as large as 3" width
- Spacing increased between bikes to 14"
- Foot-actuated pivot lever for easy rack folding/unfolding
- Integrated bike lock
- Tool-Free installation
Additional information
| Hitch Type | 2" Receiver |
|---|---|
| Bike Weight Limit (per bike) | 40 |
| Number of Bikes | 2 |
| Bike Mount Type | Tray |
| Tilt/Swing | Tilt |
| Rack Weight | 32 |
Reviews (0)
| 5 |
|
0 |
| 4 |
|
0 |
| 3 |
|
0 |
| 2 |
|
0 |
| 1 |
|
0 |
- Derailleur Hanger Hardware 6
- Derailleur 5
- Body Cleanser/Hygiene 6
- Integrated Handlebar/Aero Bar 7
- Tubeless Valves 147
- Spoke Nipple 34
- Road Caliper Brakes 54
- Spoke Kit 14
- Assembly Compound 21
- Linear Pull Brake Small Part 7
- Heart Rate Straps and Accessories 10
- Power Meter 5
- Tubeless Sealant 52
- Water Bottle Part and Accessory 13
- Grease 44
- Axle Nut and Bolt 19
- Jackets 70
- Ski Carrier 8
- BMX Caliper Brake Sets 7
- Pulley Assembly 63
- Miscellaneous Rear Derailleur Part 90
- Ebike Crankset 94
- Saddle Care and Part 7
- Cyclocross Frame 18
- Clip-On Aero Bar 24
- Washer 7
- Drum Brake Part 5
- Anti-Fog 5
- Internally Geared Hub 21
- Brake Lever Hood 32
- Crank Part 45
- Front Derailleur 84
- All-Road Frame 40
- Seatpost Part 31
- Cable Stop and Guides 13
- EPS Charger 5
- Bulk Wax 5
- Miscellaneous Spoke Tool 5
- Headlight & Taillight Set 32
- Detanglers 16
- Bolt 19
- Hub Set 5
- Watersport Carrier 5
- TT/Aero Brake/Shift Lever 5
- Cage Assembly 59
- Axle Set 27
- Front QR Skewer 12
- Y-Wrench 5
- Headset Stack Spacer 68
- Front Hub 118
- Nut 7
- Belt Drive Belt 17
- First Aid Kit 5
- Dropper Seatpost 232
- Taillight 68
- Pillow 5
- Headset Upper 47
- Sunglasses 23
- Leg Bands 8
- Drop Bar Inline Levers 9
- Interface Unit 5
- Kit-In-A-Box Road Group 9
- Tubeless System Enhancements 43
- Entrees 5
- Steerer Extender 5
- Quick Release Skewer Pair 12
- Rear Shock Mount Kit 182
- Bike Protector 6
- Thru Axle Trailer Hitch Adaptor 46
- Front Derailleur Adaptor 17
- Stem Small Part 28
- Lower Leg Assembly 31
- Tubular Adhesive 9
- Saddle 15
- Left Crank Arm 65
- Retail Store Fixture and Accessory 6
- Beverage Essentials 11
- Wound and Skin Care 5
- Decarolis 25
- Trailers 14
- Wheel Bag 7
- Hammock 5
- Dropper Seatpost Part 229
- Running Pant 5
- U-Brakes 16
- Power Unit 5
- Cookware 5
- Rear Mount Rack 50
- Anti Chafe 26
- Stem Column Adaptor 9
- Trainer Accessories 20
- Service Kit 95
- Travel / Shipping Case Part 5
- Strollers 5
- Pulley Bolt 11
- Headset Top Cap 25
- Dry Bag/Stuff Sack 5
- Backpack 20
- Seatposts 120
- Stems 487
- Bleed Kit 5
- Dresses and Skirts 5
- Foot Care 5
- BMX Bikes 5
- Child Carrier 20
- Tool Wrap 23
- TT/Aero Lever Pair 8
- Chair 5
- Chainstay/Frame Protection 119
- Running Tight 5
- Linear Pull Brake Set 13
- Extra Parts 9
- Safety Light 7
- Woman 5
- Tubeless Conversion Kits 13
- Other Rack 23
- Front Custom Wheel 5
- Trainer Part 35
- Thru Axle 137
- Shifter Battery 8
- Trailer Stroller/Ski Kits 8
- Cable Anchor Assembly 15
- Cassettes 262
- Van/Truck Bed Rack Part 6
- Ebike Lock 25
- Spoke 5
- Disc Rotor Parts and Lockrings 42
- Apron 5
- Insect Net 5
- Bottle Cage Storage 11
- Gear Maintenance 5
- Rim Part 34
- Insect Bite Relief and Repellent 5
- Bottom Bracket 5
- Pocket Knives and Multi-tool 5
- Rack Service Part 9
- Cantilever Brake Set 5
- Junction Box 15
- Bianchi 96
- Tubeless Tape 86
- BMX Hub Guard 28
- Wear Indicator 5
- Bell 74
- First Responder Assistance 5
- Trailer Wheels and Axle Parts 43
- Trailer Covers/Fabric Parts 19
- Cable Adjustment Assembly 9
- Seatpost Clamp 119
- Load Bar Tower 5
- Small Part 68
- Mountain Bike 37
- Freehub Body 135
- Disc Rotor Adaptor 8
- Pedal Washer 9
- Thread Repair Kits 5
- Kid 5
- Cartridge Bearing 140
- Internally Geared Hub Part 78
- Load Bar/Tower Set 9
- Roof Rack Accessory 15
- Repair Stands 35
- Cargo Carrier 5
- Disc Brake Fluid 5
- Shifter Battery Charger 8
- Remote Upgrade Kits 6
- Peg Sleeve 13
- Knickers 10
- Casual Short 5
- Mountain Frame 42
- Luggage/Duffel Bag 8
- Trailer Frame Parts 16
- Cable Fixing Assembly 9
- Hydraulic Brake Lever Part 220
- Load Bar 5
- Coffee 5
- Brake Shoe and Pad 92
- Headlights 55
- Disc Brake Hose Kit 95
- One-Piece Crankset 5
- Spoke Tensiometer 5
- Rigid Mountain Fork 13
- Pedal Wrench 5
- Disc Brake & Lever 4
- Spindle 16
- BMX Crankset 57
- Remote Shifter 11
- Rack Accessories 9
- U-Brake Part 7
- Battery Charger Cable 6
- Helmet Parts and Accessories 5
- Light Part 45
- Top Cap 8
- Cyclocross Bike 13
- Shifter 5
- Lumbar/Fanny Pack 10
- Other Trailer Parts 21
- Phone Charger 5
- Bracket/Accessory 30
- Travel / Shipping Cases 8
- Bag Part 26
- Chainring 6
- Polish 11
- Brake Pad and Shoe Part 14
- Belt Drive Ring 13
- Branded Sign/Banner 11
- Track Frames 5
- Pedal Small Part 104
- Recovery 5
- Compression Bottom 5
- Swim Wear 5
- Folding Lock 30
- Hitch Rack Part 5
- Road Shifter Part 93
- Rear Wiring Kit 5
- Rear Hub 213
- Trunk Rack Accessory 6
- Air Springs & Parts 135
- T-Shirt 5
- Roof Rack Bike Carrier 12
- Messenger Bag 5
- Brake Housing 35
- Mustache Bar 5
- Child Carrier Trailer 16
- Aero Bar Extensions 17
- Computer Mount Kit/Adapter 113
- Road Frames 20
- BMX Peg 15
- Linear Pull Brake Noodle 15
- Cadence/Speed Sensor 16
- Training Wheel 11
- Rear Shock Service Kits 50
- Tire Liners 38
- Brake Lever 5
- Crown Race 27
- Disc Brake Calipers 120
- Dropper Seatpost Remote 59
- Roof Rack Wheel Fork 8
- Roller Brake 9
- Disc Golf 5
- Cleat Cover 8
- Bar Tape 172
- Reflective Stick-on 5
- Bars 44
- Direct Mount Chainrings 348
- Track Bike 9
- Brake 5
- Bicycle Mounted Rack Part 57
- Chains 193
- Fixtures & Accessories 2
- Bag & Tool Kit 2
- Hitch Rack Accessory 30
- Road Bike 25
- Drop Bar Stoker Lever 5
- Magnet 7
- Container 5
- Cable Cutter 5
- Other Brake Lever Part 27
- Compression Plug 14
- Headset Tool 5
- Dropout 39
- Wheel/Frame Lock 19
- Fairing 5
- Electronic Shifter Extra Part 25
- Disc Golf Display 5
- Van/Truck Bed Rack 11
- Bottom 5
- Water Bottle Cage Hardware 39
- Cyclocross/Hybrid Fork 32
- Gloves 401
Related Products
The Hope Spiderless Direct Mount eBike chainring for Shimano E8000 eBike motors are specifically designed to withstand the additional rigors of the increased power transmitted by eBike motors.
- Directly mounts to Shimano E8000 eBike motors and replaces the full spider assembly for a lighter and cleaner looking set- up
- CNC machined from a single piece of 7075-T6 aluminum billet, these chainrings provide the perfect blend of light weight and strength
- Narrow/Wide chainring is designed to retain the chain without the need of a chain device
- Designed to give a 52mm chainline to suit 148 Boost Frames
- Hard anodized for an ultra-durable finish and increased longevity
-
In stock
NV 2.0 Base represents the same great features expected from Kuat at a lower price-point: fat bike compatibility up to 4.8″, cable locks, a re-designed rack pivot. The NV 2.0 Base does not include a Trail Doc, but can retrofitted with the Trail Doc kit.
- Two-bike capacity, up to 60lbs each
- Tool-free install
- Fits wheelbases up to 50"
- Includes one Phat Bike Kit to fit fat bikes with tires up to 4.8". Additional kits available separately
- Fully integrated cable locks
-
In stock
Take your bikes to the Edge with a heavy-duty hitch rack that carries 2 bikes (80 lbs each) and supports eBikes, mountain bikes, and more. Its zero-frame contact, spring-loaded arm protects your frame, fork, and brake hoses. Fits 2” hitch receivers, including RVs (Class A, B & C), with a tool-free anti-wobble system for a secure ride.
- Fixed-position arms simplify securing your bike
- Tilts away for trunk, hatch, and tailgate access even when bikes are loaded
- Integrated locking cables secure bikes, and a locking hitch pin keeps the rack attached
- Secures bikes by the tires, preventing frame, fork, or brake hose damage
- Carries two bikes up to 80 lb each, compatible with eBikes and mountain bikes
-
Only 5 left in stock
The Padrone features a large bike computer display, making it easy to see in all conditions.
- The Padrone features the following measurements: Current/ average/ maximum speed, total distance, trip distance, elapsed time, clock, and stopwatch
- Its large display size makes it easy to read while riding
- Easy to set up, read and use
- ClickTec button interface for easy use
- Analog wireless computer
- Programmable odometer
- Auto start/stop
- Menu screen to change setting
- Battery indicator
- Includes FlexTight universal mounting bracket
- CatEye regular analog speed sensor (SPD-01)
- Works with the slim speed sensor (SPD-02) used for Strada Wireless Slim as well
- Battery type: Main unit = CR2032 x 1, SPD sensor = CR2032 x 1
-
In stock
Take your bikes anywhere with a heavy-duty hitch rack that carries 2 bikes (60 lbs each) and supports eBikes, mountain bikes, and more. Its zero-frame contact, spring-loaded arm protects your frame, fork, and brake hoses. Fits 1.1/4 & 2” hitch receivers, including RVs (Class A, B & C), with a tool-free anti-wobble system for a secure ride.
-
In stock
The Beta is a lightweight, two-bike rack that features easy vehicle installation and simple to use bike mounts.
- Two-bike capacity (40 lb bikes)
- Tilts for trunk access
- Weighs only 12lbs
- Folds up for easy storage
- Features anti-sway carriages to protect bike and vehicle
-
In stock
Sherpa 2.0 features folding tire cradles that hold tires up to 3″ wide and fold flat when not in use, a foot-actuated pivot lever that allows hands-free use of unfolding the rack and a lightweight 32 lbs construction for easy installation and removal. Best used with road, CX and Mountain Bikes, the Sherpa 2.0 is ready for your next adventure.
- Two-bike capacity, up to 40 lbs each
- Holds wheelbases up to 47" and tires as large as 3" width
- Spacing increased between bikes to 14"
- Foot-actuated pivot lever for easy rack folding/unfolding
- Integrated bike lock
- Tool-Free installation
-
In stock
NV 2.0 represents an evolution of the storied NV rack: it’s sleeker, easier to use, more adjustable and allows for more bike carrying options with its 4.8″ tire width capacity. Featuring adjustable cradles for fit adjustments, stronger and longer cable locks, a re-designed rack pivot with hands-free foot lever, removable Trail Doc work-stand, and updated ratchet arms for a more secure hold on your bikes. Ideal for fat bikes, enduro and downhill mountain bikes. The NV 2.0 takes everything that made the NV great and makes it better.
- Two-bike capacity, up to 60lbs each
- No-tool install
- Fits wheelbases up to 50”
- Fits tire width up to 4.8” with Phat Bike Kit (sold separately)
- Includes integrated cable locks and hitch pin lock with matching keys
- Trail Doc is removable so that it may be used with Tri Doc tripod
- Three position wheel scoops allow for raising/lowering the bike to help with handlebar interference
-
In stock
Sherpa 2.0 features folding tire cradles that hold tires up to 3″ wide and fold flat when not in use, a foot-actuated pivot lever that allows hands-free use of unfolding the rack and a lightweight 32 lbs construction for easy installation and removal. Best used with road, CX and Mountain Bikes, the Sherpa 2.0 is ready for your next adventure.
- Two-bike capacity, up to 40 lbs each
- Holds wheelbases up to 47" and tires as large as 3" width
- Spacing increased between bikes to 14"
- Foot-actuated pivot lever for easy rack folding/unfolding
- Integrated bike lock
- Tool-Free installation
-
In stock
Kuat Transfer V2 Hitch Bike Racks. The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The new Transfer v2 also has the modular configurations available so you get a multi-rider rack at an everyone-friendly price.
- Includes semi-integrated bicycle cable lock
- Tamper-resistant hitch security
- More robust hitch design for enhanced stability in tow
- Holds up to a 50" wheelbase bike
- Holds wheels 18"-29"
- Holds tires up to 5" with accessory strap
- Automotive-grade 750 hour salt spray hardware
-
In stock
NV 2.0 represents an evolution of the storied NV rack: it’s sleeker, easier to use, more adjustable and allows for more bike carrying options with its 4.8″ tire width capacity. Featuring adjustable cradles for fit adjustments, stronger and longer cable locks, a re-designed rack pivot with hands-free foot lever, removable Trail Doc work-stand, and updated ratchet arms for a more secure hold on your bikes. Ideal for fat bikes, enduro and downhill mountain bikes. The NV 2.0 takes everything that made the NV great and makes it better.
- Two-bike capacity, up to 60lbs each
- No-tool install
- Fits wheelbases up to 50”
- Fits tire width up to 4.8” with Phat Bike Kit (sold separately)
- Includes integrated cable locks and hitch pin lock with matching keys
- Trail Doc is removable so that it may be used with Tri Doc tripod
- Three position wheel scoops allow for raising/lowering the bike to help with handlebar interference
-
In stock
The Kuat Piston Pro X is packed with top-line feature starting with genuine Kashima coated hydro-pneumatic arms make loading and unloading a one-handed operation. Touchless arms grab up to 5″ wide tires, keeping your bike secure, and your paint pristine. low-profile integrated led tail lights synchronize with your vehicle, providing enhanced rear visibility and on-road safety.
- 99% Metal Construction
- OneTap levers make loading your bikes easy, and fun
- Genuine Kashima coated struts ensure your rack not only functions flawlessly for years, but drops jaws the whole time
- No Fade Powdercoat
- FastFit Wheel Chock System allows for changing wheel sizes from 18” to 29” in seconds, tool-free
- Stainless Steel Hitch Lock
- No Frame Contact
- Flat 4-Pin LED Light Connector
-
In stock








Reviews
There are no reviews yet.