Elite XDR Driver (Freehub Body) for Direct Drive Trainers
-
$79.99
Optional drivers allow other brand cassettes to be used.
Out of stock
Description
Optional drivers allow other brand cassettes to be used.
Reviews (0)
| 5 |
|
0 |
| 4 |
|
0 |
| 3 |
|
0 |
| 2 |
|
0 |
| 1 |
|
0 |
- Hydraulic Brake Lever Part 220
- Load Bar 6
- Coffee 6
- Brake Shoe and Pad 93
- Headlights 52
- Luggage/Duffel Bag 9
- Trailer Frame Parts 17
- Cable Fixing Assembly 10
- Rigid Mountain Fork 19
- Pedal Wrench 6
- Disc Brake & Lever 4
- Spindle 16
- BMX Crankset 62
- Remote Shifter 12
- Disc Brake Hose Kit 93
- One-Piece Crankset 6
- Spoke Tensiometer 6
- Helmet Parts and Accessories 6
- Light Part 57
- Top Cap 12
- Cyclocross Bike 17
- Shifter 6
- Rack Accessories 11
- U-Brake Part 8
- Battery Charger Cable 7
- Bracket/Accessory 27
- Travel / Shipping Cases 9
- Bag Part 25
- Chainring 7
- Polish 13
- Lumbar/Fanny Pack 12
- Other Trailer Parts 22
- Phone Charger 6
- Track Frames 6
- Pedal Small Part 109
- Recovery 6
- Compression Bottom 6
- Swim Wear 6
- Folding Lock 30
- Brake Pad and Shoe Part 17
- Belt Drive Ring 16
- Branded Sign/Banner 13
- Rear Hub 213
- Trunk Rack Accessory 7
- Air Springs & Parts 144
- T-Shirt 6
- Roof Rack Bike Carrier 13
- Hitch Rack Part 6
- Road Shifter Part 91
- Rear Wiring Kit 6
- Child Carrier Trailer 17
- Aero Bar Extensions 19
- Computer Mount Kit/Adapter 116
- Road Frames 21
- BMX Peg 19
- Messenger Bag 6
- Brake Housing 35
- Mustache Bar 6
- Rear Shock Service Kits 54
- Tire Liners 37
- Brake Lever 6
- Crown Race 28
- Disc Brake Calipers 114
- Dropper Seatpost Remote 61
- Linear Pull Brake Noodle 16
- Cadence/Speed Sensor 18
- Training Wheel 12
- Cleat Cover 9
- Bar Tape 170
- Reflective Stick-on 6
- Bars 48
- Direct Mount Chainrings 340
- Roof Rack Wheel Fork 9
- Roller Brake 10
- Disc Golf 6
- Chains 195
- Fixtures & Accessories 3
- Bag & Tool Kit 2
- Hitch Rack Accessory 33
- Road Bike 26
- Track Bike 10
- Brake 6
- Bicycle Mounted Rack Part 53
- Cable Cutter 6
- Other Brake Lever Part 28
- Compression Plug 16
- Headset Tool 6
- Dropout 43
- Wheel/Frame Lock 22
- Drop Bar Stoker Lever 6
- Magnet 8
- Container 6
- Van/Truck Bed Rack 13
- Bottom 6
- Water Bottle Cage Hardware 40
- Cyclocross/Hybrid Fork 37
- Gloves 457
- Fairing 6
- Electronic Shifter Extra Part 25
- Disc Golf Display 6
- Integrated Handlebar/Aero Bar 8
- Tubeless Valves 136
- Spoke Nipple 36
- Road Caliper Brakes 61
- Spoke Kit 17
- Derailleur Hanger Hardware 9
- Derailleur 6
- Body Cleanser/Hygiene 7
- Tubeless Sealant 55
- Water Bottle Part and Accessory 13
- Grease 45
- Axle Nut and Bolt 20
- Jackets 92
- Assembly Compound 23
- Linear Pull Brake Small Part 8
- Heart Rate Straps and Accessories 11
- Power Meter 6
- Miscellaneous Rear Derailleur Part 86
- Ebike Crankset 91
- Saddle Care and Part 8
- Cyclocross Frame 21
- Clip-On Aero Bar 25
- Ski Carrier 11
- BMX Caliper Brake Sets 6
- Pulley Assembly 66
- Internally Geared Hub 21
- Brake Lever Hood 35
- Crank Part 47
- Front Derailleur 89
- All-Road Frame 40
- Washer 10
- Drum Brake Part 6
- Anti-Fog 6
- Miscellaneous Spoke Tool 6
- Headlight & Taillight Set 27
- Detanglers 20
- Bolt 26
- Hub Set 6
- Seatpost Part 34
- Cable Stop and Guides 11
- EPS Charger 6
- Bulk Wax 6
- Axle Set 27
- Front QR Skewer 13
- Y-Wrench 6
- Headset Stack Spacer 64
- Front Hub 121
- Watersport Carrier 6
- TT/Aero Brake/Shift Lever 6
- Cage Assembly 58
- Dropper Seatpost 217
- Taillight 64
- Pillow 6
- Headset Upper 50
- Sunglasses 24
- Nut 8
- Belt Drive Belt 18
- First Aid Kit 6
- Tubeless System Enhancements 46
- Entrees 6
- Steerer Extender 6
- Quick Release Skewer Pair 13
- Rear Shock Mount Kit 184
- Leg Bands 9
- Drop Bar Inline Levers 10
- Interface Unit 6
- Kit-In-A-Box Road Group 8
- Stem Small Part 27
- Lower Leg Assembly 32
- Tubular Adhesive 9
- Saddle 16
- Left Crank Arm 58
- Bike Protector 8
- Thru Axle Trailer Hitch Adaptor 46
- Front Derailleur Adaptor 19
- Trailers 16
- Wheel Bag 8
- Hammock 6
- Dropper Seatpost Part 232
- Retail Store Fixture and Accessory 7
- Beverage Essentials 12
- Wound and Skin Care 6
- Decarolis 28
- Rear Mount Rack 47
- Anti Chafe 26
- Stem Column Adaptor 9
- Trainer Accessories 24
- Service Kit 99
- Running Pant 6
- U-Brakes 11
- Power Unit 6
- Cookware 6
- Headset Top Cap 29
- Dry Bag/Stuff Sack 6
- Backpack 23
- Seatposts 114
- Stems 477
- Travel / Shipping Case Part 6
- Strollers 6
- Pulley Bolt 12
- BMX Bikes 6
- Child Carrier 20
- Tool Wrap 23
- TT/Aero Lever Pair 9
- Chair 6
- Chainstay/Frame Protection 117
- Bleed Kit 6
- Dresses and Skirts 6
- Foot Care 6
- Tubeless Conversion Kits 14
- Other Rack 23
- Front Custom Wheel 6
- Trainer Part 33
- Thru Axle 133
- Running Tight 6
- Linear Pull Brake Set 14
- Extra Parts 10
- Safety Light 8
- Woman 6
- Cassettes 260
- Van/Truck Bed Rack Part 7
- Ebike Lock 30
- Spoke 6
- Shifter Battery 9
- Trailer Stroller/Ski Kits 9
- Cable Anchor Assembly 16
- Bottle Cage Storage 13
- Gear Maintenance 6
- Rim Part 37
- Insect Bite Relief and Repellent 6
- Bottom Bracket 6
- Pocket Knives and Multi-tool 6
- Disc Rotor Parts and Lockrings 50
- Apron 6
- Insect Net 6
- Tubeless Tape 79
- BMX Hub Guard 29
- Wear Indicator 6
- Bell 69
- First Responder Assistance 6
- Rack Service Part 11
- Cantilever Brake Set 7
- Junction Box 16
- Bianchi 96
- Seatpost Clamp 119
- Load Bar Tower 6
- Small Part 69
- Mountain Bike 41
- Freehub Body 133
- Trailer Wheels and Axle Parts 45
- Trailer Covers/Fabric Parts 20
- Cable Adjustment Assembly 10
- Cartridge Bearing 133
- Internally Geared Hub Part 68
- Load Bar/Tower Set 10
- Roof Rack Accessory 17
- Repair Stands 36
- Disc Rotor Adaptor 9
- Pedal Washer 10
- Thread Repair Kits 6
- Kid 6
- Remote Upgrade Kits 9
- Peg Sleeve 16
- Knickers 11
- Casual Short 6
- Mountain Frame 51
- Cargo Carrier 6
- Disc Brake Fluid 6
- Shifter Battery Charger 9
Related Products
The Hope Spiderless Direct Mount eBike chainring for Bosch Performance Line CX Gen 4 eBike motors are specifically designed to withstand the additional rigors of the increased power transmitted by eBike motors.
- Directly mounts to Bosch Performance Line CX eBike motors and replaces the full spider assembly for a lighter and cleaner looking set- up
- CNC machined from a single piece of 7075-T6 aluminum billet, these chainrings provide the perfect blend of light weight and strength
- Narrow/Wide chainring is designed to retain the chain without the need of a chain device
- Designed to give a 52mm chainline to suit 148 Boost Frames
- Hard anodized for an ultra-durable finish and increased longevity
-
Only 3 left in stock
The Elite Thru Axle adapter kit makes Elite trainers compatible with bicycles with 10mm to 12mm diameter through bolts on the rear wheel (lengths from 130mm to 148mm boost).
-
In stock
A clean trainer is an effective trainer. Use this disc extractor to remove the aluminum disc on the side of the NEO 2T Smart trainer to check the inside for residue and to clean, if necessary. This tool is specifically designed to open your NEO 2T while keeping you within the terms of your warranty.
-
Only 3 left in stock
The Hope Spiderless Direct Mount eBike chainring for Brose motors are specifically designed to withstand the additional rigors of the increased power transmitted by eBike motors.
- Directly mounts to Brose eBike motors and replaces the full spider assembly for a lighter and cleaner looking set- up
- CNC machined from a single piece of 7075-T6 aluminum billet, these chainrings provide the perfect blend of light weight and strength
- Narrow/Wide chainring is designed to retain the chain without the need of a chain device
- Designed to give a 52mm chainline to suit 148 Boost Frames
- Hard anodized for an ultra-durable finish and increased longevity
- Also Compatible with the Specialized Turbo Levo range of eBike motors
-
Only 2 left in stock
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
-
In stock
The Garmin Tacx Trainer Axles QR (Quick Release) are designed to make your bike compatible with Tacx trainers. These axles are essential for securely mounting bikes with different axle standards onto Tacx trainers, ensuring a stable and efficient indoor training experience.
-
In stock
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
-
In stock
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
-
In stock
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
-
Only 5 left in stock
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
-
In stock
Feedback Sports Trainer Parts.
-
In stock
The Hope Spiderless Direct Mount eBike chainring for Brose motors are specifically designed to withstand the additional rigors of the increased power transmitted by eBike motors.
- Directly mounts to Brose eBike motors and replaces the full spider assembly for a lighter and cleaner looking set- up
- CNC machined from a single piece of 7075-T6 aluminum billet, these chainrings provide the perfect blend of light weight and strength
- Narrow/Wide chainring is designed to retain the chain without the need of a chain device
- Designed to give a 52mm chainline to suit 148 Boost Frames
- Hard anodized for an ultra-durable finish and increased longevity
- Also Compatible with the Specialized Turbo Levo range of eBike motors
-
Only 3 left in stock



Reviews
There are no reviews yet.