Description
Bearings for maintaining and rebuilding DT Swiss hubs.
Additional information
| Bearing O.D. (mm) | 26 |
|---|---|
| Bearing I.D. (mm) | 15 |
| Manufacturer Number | 1526 |
| Material | Steel |
| Thickness | 7 |
Reviews (0)
Related Products
Phil Wood Upgrade sealed cartridge bearing.
-
In stock
Enduro Angular Contact bearings engage all of the bearing’s balls to spread the force over a larger surface area, minimizing wear and increasing bearing life. This is particularly important in applications like BBs, where there are constantly changing lateral loads on the bearings, which is typically the primary cause for premature bottom bracket bearing failure.
-
In stock
Industry Nine cartridge bearings are OE replacement bearings.
-
In stock
Enduro Standard Design Cartridge Bearings.
- 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals
- If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed
-
In stock
Enduro Angular Contact bearings engage all of the bearing’s balls to spread the force over a larger surface area, minimizing wear and increasing bearing life. This is particularly important in applications like BBs, where there are constantly changing lateral loads on the bearings, which is typically the primary cause for premature bottom bracket bearing failure.
-
In stock
Enduro Standard Design Cartridge Bearings.
- 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals
- If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed
-
In stock
Zero Ceramic bearings are the ultimate race day weapon. Oversized Grade 3 balls roll on races which are ground to a mirror finish after receiving Magnetite and then Cryogenic treatments for hardness and longevity, and slippery Silicone seals to produce minimum resistance.
- All measurements are in millimeters
- ABEC 5 precision cartridge bearing
- CERBEC USA Grade 3 Si3n4 Silicon Nitride balls
- 52100 high carbon Chromium alloy races
- Races receive 3 cryogenic treatments and a rust proof Magnetite finish
- "VV" type 2-lip non-contact Silicone labyrinth seals
- Nylon/graphite retainer
-
In stock
Ceramic Hybrid bearings feature ABEC-5 tolerances and premium features such as LLB seals, Graphite Nylon retainers, Silicon Nitride Grade 5 balls, and cryogenically treated steel races.
- ABEC 5 precision cartridge bearing
- Grade 5 Si3N4 Silicon Nitride balls
- 52100 high carbon Chromium alloy races
- Races receive 3 cryogenic treatments
- "LLB" type 2-lip low-contact Nitrile Butadiene rubber labyrinth seals
- Nylon/graphite retainer
- Realube Special Ceramic Grade 374 Grease
-
In stock
Phil Wood Upgrade sealed cartridge bearing.
-
In stock
Phil Wood Upgrade sealed cartridge bearing.
-
In stock
Enduro Standard Design Cartridge Bearings.
- 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals
- If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed
-
In stock
Reviews
There are no reviews yet.