Robert Axle Project Resistance Trainer 12mm Thru Axle, Length: 174 or 180mm Thread: 1.75mm
-
$54.00
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
Description
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
Reviews (0)
| 5 |
|
0 |
| 4 |
|
0 |
| 3 |
|
0 |
| 2 |
|
0 |
| 1 |
|
0 |
- Spoke Nipple 37
- Road Caliper Brakes 64
- Spoke Kit 17
- Derailleur Hanger Hardware 9
- Derailleur 6
- Body Cleanser/Hygiene 7
- Integrated Handlebar/Aero Bar 8
- Tubeless Valves 144
- Axle Nut and Bolt 21
- Jackets 93
- Assembly Compound 23
- Linear Pull Brake Small Part 8
- Heart Rate Straps and Accessories 11
- Power Meter 6
- Tubeless Sealant 56
- Water Bottle Part and Accessory 13
- Grease 46
- Saddle Care and Part 8
- Cyclocross Frame 23
- Clip-On Aero Bar 23
- Ski Carrier 11
- BMX Caliper Brake Sets 6
- Pulley Assembly 67
- Miscellaneous Rear Derailleur Part 86
- Ebike Crankset 96
- Crank Part 46
- Front Derailleur 89
- All-Road Frame 40
- Washer 10
- Drum Brake Part 6
- Anti-Fog 6
- Internally Geared Hub 22
- Brake Lever Hood 33
- Bolt 23
- Hub Set 6
- Seatpost Part 35
- Cable Stop and Guides 11
- EPS Charger 6
- Bulk Wax 6
- Miscellaneous Spoke Tool 6
- Headlight & Taillight Set 27
- Detanglers 20
- Y-Wrench 6
- Headset Stack Spacer 66
- Front Hub 122
- Watersport Carrier 6
- TT/Aero Brake/Shift Lever 6
- Cage Assembly 58
- Axle Set 29
- Front QR Skewer 13
- Pillow 6
- Headset Upper 50
- Sunglasses 24
- Nut 8
- Belt Drive Belt 18
- First Aid Kit 6
- Dropper Seatpost 229
- Taillight 68
- Quick Release Skewer Pair 13
- Rear Shock Mount Kit 185
- Leg Bands 9
- Drop Bar Inline Levers 10
- Interface Unit 6
- Kit-In-A-Box Road Group 9
- Tubeless System Enhancements 46
- Entrees 6
- Steerer Extender 6
- Tubular Adhesive 10
- Saddle 16
- Left Crank Arm 60
- Bike Protector 8
- Thru Axle Trailer Hitch Adaptor 45
- Front Derailleur Adaptor 19
- Stem Small Part 27
- Lower Leg Assembly 33
- Hammock 6
- Dropper Seatpost Part 234
- Retail Store Fixture and Accessory 7
- Beverage Essentials 11
- Wound and Skin Care 6
- Decarolis 28
- Trailers 16
- Wheel Bag 8
- Trainer Accessories 25
- Service Kit 101
- Running Pant 6
- U-Brakes 11
- Power Unit 6
- Cookware 6
- Rear Mount Rack 48
- Anti Chafe 25
- Stem Column Adaptor 10
- Backpack 23
- Seatposts 121
- Stems 477
- Travel / Shipping Case Part 6
- Strollers 6
- Pulley Bolt 12
- Headset Top Cap 24
- Dry Bag/Stuff Sack 6
- TT/Aero Lever Pair 9
- Chair 6
- Chainstay/Frame Protection 117
- Bleed Kit 6
- Dresses and Skirts 6
- Foot Care 6
- BMX Bikes 6
- Child Carrier 21
- Tool Wrap 23
- Trainer Part 33
- Thru Axle 127
- Running Tight 6
- Linear Pull Brake Set 14
- Extra Parts 10
- Safety Light 8
- Woman 6
- Tubeless Conversion Kits 13
- Other Rack 23
- Front Custom Wheel 6
- Ebike Lock 30
- Spoke 6
- Shifter Battery 9
- Trailer Stroller/Ski Kits 8
- Cable Anchor Assembly 16
- Cassettes 269
- Van/Truck Bed Rack Part 7
- Insect Bite Relief and Repellent 6
- Bottom Bracket 6
- Pocket Knives and Multi-tool 6
- Disc Rotor Parts and Lockrings 52
- Apron 6
- Insect Net 6
- Bottle Cage Storage 13
- Gear Maintenance 6
- Rim Part 37
- Bell 73
- First Responder Assistance 6
- Rack Service Part 11
- Cantilever Brake Set 7
- Junction Box 16
- Bianchi 96
- Tubeless Tape 76
- BMX Hub Guard 29
- Wear Indicator 6
- Small Part 67
- Mountain Bike 43
- Freehub Body 135
- Trailer Wheels and Axle Parts 45
- Trailer Covers/Fabric Parts 20
- Cable Adjustment Assembly 10
- Seatpost Clamp 120
- Load Bar Tower 6
- Roof Rack Accessory 17
- Repair Stands 36
- Disc Rotor Adaptor 9
- Pedal Washer 9
- Thread Repair Kits 6
- Kid 6
- Cartridge Bearing 133
- Internally Geared Hub Part 68
- Load Bar/Tower Set 10
- Casual Short 6
- Mountain Frame 51
- Cargo Carrier 6
- Disc Brake Fluid 6
- Shifter Battery Charger 9
- Remote Upgrade Kits 9
- Peg Sleeve 16
- Knickers 11
- Coffee 6
- Brake Shoe and Pad 90
- Headlights 52
- Luggage/Duffel Bag 9
- Trailer Frame Parts 17
- Cable Fixing Assembly 10
- Hydraulic Brake Lever Part 213
- Load Bar 6
- Spindle 17
- BMX Crankset 62
- Remote Shifter 12
- Disc Brake Hose Kit 92
- One-Piece Crankset 6
- Spoke Tensiometer 6
- Rigid Mountain Fork 22
- Pedal Wrench 6
- Disc Brake & Lever 4
- Cyclocross Bike 18
- Shifter 6
- Rack Accessories 11
- U-Brake Part 8
- Battery Charger Cable 7
- Helmet Parts and Accessories 6
- Light Part 57
- Top Cap 14
- Bag Part 26
- Chainring 7
- Polish 13
- Lumbar/Fanny Pack 14
- Other Trailer Parts 22
- Phone Charger 6
- Bracket/Accessory 27
- Travel / Shipping Cases 9
- Compression Bottom 6
- Swim Wear 6
- Folding Lock 30
- Brake Pad and Shoe Part 16
- Belt Drive Ring 16
- Branded Sign/Banner 13
- Track Frames 6
- Pedal Small Part 109
- Recovery 6
- T-Shirt 6
- Roof Rack Bike Carrier 13
- Hitch Rack Part 6
- Road Shifter Part 92
- Rear Wiring Kit 6
- Rear Hub 218
- Trunk Rack Accessory 7
- Air Springs & Parts 146
- Computer Mount Kit/Adapter 116
- Road Frames 22
- BMX Peg 20
- Messenger Bag 6
- Brake Housing 38
- Mustache Bar 6
- Child Carrier Trailer 17
- Aero Bar Extensions 19
- Crown Race 29
- Disc Brake Calipers 120
- Dropper Seatpost Remote 60
- Linear Pull Brake Noodle 17
- Cadence/Speed Sensor 18
- Training Wheel 12
- Rear Shock Service Kits 54
- Tire Liners 38
- Brake Lever 6
- Bars 50
- Direct Mount Chainrings 353
- Roof Rack Wheel Fork 9
- Roller Brake 10
- Disc Golf 6
- Cleat Cover 9
- Bar Tape 169
- Reflective Stick-on 6
- Bag & Tool Kit 2
- Hitch Rack Accessory 33
- Road Bike 26
- Track Bike 10
- Brake 6
- Bicycle Mounted Rack Part 55
- Chains 195
- Fixtures & Accessories 3
- Headset Tool 6
- Dropout 43
- Wheel/Frame Lock 19
- Drop Bar Stoker Lever 6
- Magnet 8
- Container 6
- Cable Cutter 6
- Other Brake Lever Part 29
- Compression Plug 17
- Cyclocross/Hybrid Fork 40
- Gloves 470
- Fairing 6
- Electronic Shifter Extra Part 25
- Disc Golf Display 6
- Van/Truck Bed Rack 13
- Bottom 6
- Water Bottle Cage Hardware 40
Related Products
The Padrone features a large bike computer display, making it easy to see in all conditions.
- The Padrone features the following measurements: Current/ average/ maximum speed, total distance, trip distance, elapsed time, clock, and stopwatch
- Its large display size makes it easy to read while riding
- Easy to set up, read and use
- ClickTec button interface for easy use
- Analog wireless computer
- Programmable odometer
- Auto start/stop
- Menu screen to change setting
- Battery indicator
- Includes FlexTight universal mounting bracket
- CatEye regular analog speed sensor (SPD-01)
- Works with the slim speed sensor (SPD-02) used for Strada Wireless Slim as well
- Battery type: Main unit = CR2032 x 1, SPD sensor = CR2032 x 1
-
In stock
A clean trainer is an effective trainer. Use this disc extractor to remove the aluminum disc on the side of the NEO 2T Smart trainer to check the inside for residue and to clean, if necessary. This tool is specifically designed to open your NEO 2T while keeping you within the terms of your warranty.
-
Only 4 left in stock
The Garmin Tacx Trainer Axles QR (Quick Release) are designed to make your bike compatible with Tacx trainers. These axles are essential for securely mounting bikes with different axle standards onto Tacx trainers, ensuring a stable and efficient indoor training experience.
-
In stock
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
-
Only 5 left in stock
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
-
In stock
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
-
In stock
The Hope Spiderless Direct Mount eBike chainring for Brose motors are specifically designed to withstand the additional rigors of the increased power transmitted by eBike motors.
- Directly mounts to Brose eBike motors and replaces the full spider assembly for a lighter and cleaner looking set- up
- CNC machined from a single piece of 7075-T6 aluminum billet, these chainrings provide the perfect blend of light weight and strength
- Narrow/Wide chainring is designed to retain the chain without the need of a chain device
- Designed to give a 52mm chainline to suit 148 Boost Frames
- Hard anodized for an ultra-durable finish and increased longevity
- Also Compatible with the Specialized Turbo Levo range of eBike motors
-
Only 3 left in stock
-
Only 5 left in stock
The Hope Spiderless Direct Mount eBike chainring for Bosch Performance Line CX Gen 4 eBike motors are specifically designed to withstand the additional rigors of the increased power transmitted by eBike motors.
- Directly mounts to Bosch Performance Line CX eBike motors and replaces the full spider assembly for a lighter and cleaner looking set- up
- CNC machined from a single piece of 7075-T6 aluminum billet, these chainrings provide the perfect blend of light weight and strength
- Narrow/Wide chainring is designed to retain the chain without the need of a chain device
- Designed to give a 52mm chainline to suit 148 Boost Frames
- Hard anodized for an ultra-durable finish and increased longevity
-
Only 4 left in stock
The Elite Thru Axle adapter kit makes Elite trainers compatible with bicycles with 10mm to 12mm diameter through bolts on the rear wheel (lengths from 130mm to 148mm boost).
-
In stock
Robert Axle Project thru axles allow modern frames to be used with axle mount trainers.
- For use with bike trainers such as 1up, Blackburn, Cyclops, Kinetic, Tacx and more
- IMPORTANT: Before ordering, make sure your specific trainer will accommodate the width of the thru-axle equipped bike that you are using
- Measure trainer at the widest setting and measure the bike frame width at the rear hub
- The Robert Axle ends will extend 15mm past the frame on each side
- Axle shaft and axle ends are machined from 7075 aluminum and hard anodized
- Installed or removed using a 5mm Allen wrench
- Designed, built and tested in the USA
-
Only 1 left in stock
The Hope Spiderless Direct Mount eBike chainring for Shimano E8000 eBike motors are specifically designed to withstand the additional rigors of the increased power transmitted by eBike motors.
- Directly mounts to Shimano E8000 eBike motors and replaces the full spider assembly for a lighter and cleaner looking set- up
- CNC machined from a single piece of 7075-T6 aluminum billet, these chainrings provide the perfect blend of light weight and strength
- Narrow/Wide chainring is designed to retain the chain without the need of a chain device
- Designed to give a 52mm chainline to suit 148 Boost Frames
- Hard anodized for an ultra-durable finish and increased longevity
-
Only 5 left in stock



Reviews
There are no reviews yet.