Description
Bearings for maintaining and rebuilding DT Swiss hubs.
Additional information
| Bearing O.D. (mm) | 37 |
|---|---|
| Bearing I.D. (mm) | 27 |
| Manufacturer Number | 2737 |
| Material | Steel |
| Thickness | 7 |
Reviews (0)
Related Products
ABEC-3 Sealed Bearing
-
In stock
Phil Wood Upgrade sealed cartridge bearing.
-
In stock
Zero Ceramic bearings are the ultimate race day weapon. Oversized Grade 3 balls roll on races which are ground to a mirror finish after receiving Magnetite and then Cryogenic treatments for hardness and longevity, and slippery Silicone seals to produce minimum resistance.
- All measurements are in millimeters
- ABEC 5 precision cartridge bearing
- CERBEC USA Grade 3 Si3n4 Silicon Nitride balls
- 52100 high carbon Chromium alloy races
- Races receive 3 cryogenic treatments and a rust proof Magnetite finish
- "VV" type 2-lip non-contact Silicone labyrinth seals
- Nylon/graphite retainer
-
In stock
Enduro Standard Design Cartridge Bearings.
- 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals
- If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed
-
In stock
-
In stock
MAX type bearings are designed specifically for suspension pivots. Using a special design where the maximum number of balls are inserted into the bearing, they have more load capacity than standard radial bearings The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with suspension pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.
- 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals, full complement of bearings, up to 45% increased load capacity
-
In stock
Phil Wood Upgrade sealed cartridge bearing.
-
In stock
MAX type bearings are designed specifically for suspension pivots. Using a special design where the maximum number of balls are inserted into the bearing, they have more load capacity than standard radial bearings The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with suspension pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.
- 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals, full complement of bearings, up to 45% increased load capacity
-
In stock
Enduro Standard Design Cartridge Bearings.
- 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals
- If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed
-
In stock
Ceramic Hybrid bearings feature ABEC-5 tolerances and premium features such as LLB seals, Graphite Nylon retainers, Silicon Nitride Grade 5 balls, and cryogenically treated steel races.
- ABEC 5 precision cartridge bearing
- Grade 5 Si3N4 Silicon Nitride balls
- 52100 high carbon Chromium alloy races
- Races receive 3 cryogenic treatments
- "LLB" type 2-lip low-contact Nitrile Butadiene rubber labyrinth seals
- Nylon/graphite retainer
- Realube Special Ceramic Grade 374 Grease
-
In stock
Enduro Standard Design Cartridge Bearings.
- 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals
- If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed
-
In stock
Reviews
There are no reviews yet.